| END CONNECTION DESIGN | ELBOW 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| BURST TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED EXTERNAL HOSE 1ST END |
| CONNECTION TYPE | THREADED EXTERNAL HOSE 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLOW ANGLE | 45.0 DEGREES 2ND END |
| INSIDE DIAMETER | 0.620 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | HOSE ASSY NO 10 CR 66.00 2883 |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM OPERATING PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 66.000 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 4.000 INCHES |
| NOMINAL THREAD SIZE | 1.000 INCHES 2ND END |
| NOMINAL THREAD SIZE | 1.000 INCHES 1ST END |
| OUTSIDE DIAMETER | 1.000 INCHES NOMINAL |
| SPECIAL FEATURES | THREAD TYPE ORFS BOTH ENDS; OTC CODE NUMBER 2883; FINISH PER SAE J516; CLEANLINESS EACH HOSE SHALL BE INTERNALLY CLEANED TO AN ISO SOLID CONTAMINATION CODE OF 17/14 AFTER ASSEMBLY; THE MAX ABRASIVE PARTICLE SIZE WHEN REPORTED PER ISO 3938, TECHNIQUE ABC IS 0.040 INCH, 1020 MICRONS; CAP ENDS OF HOSE ASSEMBLY WITH PLASTIC COVERS AFTER CLEANING TO PROTECT FROM CONTAMINATION DURING HANDLING, STORAGE, AND SHIPPING |
| SUPPLEMENTARY FEATURES | PROOF TESTING A SAMPLE ASSEMBLY SHALL BE RANDOMLY SELECTED FROM EACH LOT OF HOSE ASSEMBLIES MANUFACTURED; THE SAMPLE RATE SHALL BE A MIN OF ONE HOSE ASSEMBLY FOR EACH 100 ASSEMBLIES BUILT, OR ONE PER LOT SIZE LESS THAN 100 HOSE ASSEMBLIES; THE SUPPLIER SHALL PROOF TEST IAW SAE J517; FOR A PERIOD OF NOT LESS THAN 30 SECONDS AS DEFINED IN SAE J343 |
| TEMP RATING | -50.0 DEG FAHRENHEIT SINGLE RESPONSE AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE |
| THREAD QUANTITY PER INCH | 14 2ND END |
| THREAD QUANTITY PER INCH | 14 1ST END |
| THREAD SERIES DESIGNATOR | UNS 1ST END |
| THREAD SERIES DESIGNATOR | UNS 2ND END |