| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL CORROSION RESISTING ALL ENDS |
| END FLANGE CONSTRUCTION | SOLID 1ST END |
| BURST TEST PRESSURE | 9000.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | PLAIN 1ST END |
| CONNECTION TYPE | PLAIN FACE FLANGE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FEATURES PROVIDED | NUTS DRILLED FOR LOCKWIRE |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING PASSIVATE 1ST END |
| FLANGE OUTSIDE DIAMETER | 1.200 INCHES NOMINAL 1ST END |
| FLANGE STYLE | ROUND W/ OUT BOLT HOLES 1ST END |
| FLANGE THICKNESS | 0.100 INCHES NOMINAL 1ST END |
| INSIDE DIAMETER | 0.750 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED FIBER AND OUTER LAYER MOLDED PLASTIC |
| OUTER COVERING ENVIRONMENTAL PROTECTION | WEATHERPROOF |
| OUTSIDE DIAMETER | 1.300 INCHES NOMINAL |
| MAXIMUM OPERATING PRESSURE | 2500.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 27.500 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 9.000 INCHES |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-PLASTIC, THERMOPLASTIC; WEAPON SYSTEM ESSENTIAL; 1.25-12 UNF 2B THREADS; SEALS TO O'RING FACE SEAL UNION THREADPIECE |
| SPECIFICATION/STANDARD DATA | SAE J517 100R8 NATIONAL STD/SPEC |
| TEMP RATING | -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE |