| END CONNECTION DESIGN | ELBOW 1ST END |
| END CONNECTION DESIGN | STRAIGHT 2ND END |
| BURST TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED EXTERNAL HOSE 1ST END |
| CONNECTION TYPE | THREADED EXTERNAL HOSE 2ND END |
| CONNECTION STYLE | GASKET SEAL 1ST END |
| CONNECTION STYLE | GASKET SEAL 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLOW ANGLE | 90.0 DEGREES 1ST END |
| INSIDE DIAMETER | 0.190 INCHES NOMINAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | HOSE ASSY NO 4 CR 83.0 2312 |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM OPERATING PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 83.000 INCHES NOMINAL WORKING |
| MINIMUM INSIDE BENDING RADIUS | 0.750 INCHES |
| NOMINAL THREAD SIZE | 0.440 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.440 INCHES 2ND END |
| SPECIAL FEATURES | HOSE CONFORMS TO SAE 100RS; OTC CODE NUMBER 2312; HOSE ASSY SHALL CONFORM TO SAE J517 WITH THE EXCEPTION THE ASSEMBLIES SHALL OPERATE IN THE TEMPERATURE RANGE OF M50.0 TO 212.0 DEG F CONTINUOUS AND 257 DEG F INTERMITTENT; FINISH PER SAE J516; EACH HOSE SHALL BEINTERNALLY CLEANED TO AN ISO SOLID CONTAMINATION CODE OF 17/14 AFTER ASSEMBLY, THE MAX ABRASIVE PARTICLE SIZE WHEN REPORTED PER ISO 3938, TECHNIQUE A, B, C, IS 0.040 INCH, 1020 MICRONS, CAP ENDS OF HOSE ASSY WITH PLASTIC COVERS AFTER CLEANING TO PROTECT FROM CONTAMINATION DURING HANDLING, STORAGE AND SHIPPING |
| SUPPLEMENTARY FEATURES | A SAMPLE ASSY SHALL BE RANDOMLY SELECTED FROM EACH LOT OF HOSE ASSY MANUFACTURED, THE SAMPLE RATE SHALL BE A MIN OF ONE HOSE ASSY FOR EACH 100 ASSEMBLIES BUILT OR ONE PER LOT SIZE LESS THAN 100 HOSE ASSEMBLIES, THE SUPPLIERSHALL PROOF TEST IAW SAE J517, FOR A PERIOD OF NOT LESS THAN 30 SECONDS AS DEFINED IN SAE J343 |
| TEMP RATING | -50.0 DEG FAHRENHEIT SINGLE RESPONSE AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE |
| THREAD QUANTITY PER INCH | 20 1ST END |
| THREAD QUANTITY PER INCH | 20 2ND END |