| END CONNECTION DESIGN | ELBOW 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| BURST TEST PRESSURE | 16000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| CONNECTION STYLE | SWIVEL NUT, GASKET SEAL 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLOW ANGLE | 45.0 DEGREES 2ND END |
| HYDROSTATIC TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.380 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, ETHYLENE PROPYLENE |
| OUTSIDE DIAMETER | 0.690 INCHES NOMINAL |
| MAXIMUM OPERATING PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 25.000 INCHES NOMINAL OVERALL |
| MINIMUM INSIDE BENDING RADIUS | 3.500 INCHES |
| NOMINAL THREAD SIZE | 0.562 INCHES 2ND END |
| NOMINAL THREAD SIZE | 0.688 INCHES 1ST END |
| SPECIAL FEATURES | ALL HYDRAULIC FLUID CONTRACT SURFACES AND ASSOCIATED RESIDUAL HYDRAULIC FLUID SHALL BE IN ACCORDANCE WITH MIL-STD-1246,CLEANLINESS LEVEL 200 |
| SEAT ANGLE | 37.0 DEGREES 2ND END |
| TEMP RATING | -50.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 2B 2ND END |
| THREAD CLASS | 2B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD SERIES DESIGNATOR | UN 1ST END |
| THREAD SERIES DESIGNATOR | UNF 2ND END |
| THREAD QUANTITY PER INCH | 16 1ST END |