| END CONNECTION DESIGN | ELBOW 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| BURST TEST PRESSURE | 16000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| EXTERIOR COLOR | GRAY/GREY |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM 1ST END |
| FLOW ANGLE | 90.0 DEGREES 2ND END |
| HYDROSTATIC TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 1.000 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND 2ND LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND 3RD LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND 4TH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND WEATHERPROOF |
| OUTSIDE DIAMETER | 1.500 INCHES NOMINAL |
| MAXIMUM OPERATING PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 25.000 INCHES NOMINAL OVERALL |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 12.000 INCHES |
| NOMINAL THREAD SIZE | 1.562 INCHES 1ST END |
| NOMINAL THREAD SIZE | 1.562 INCHES 2ND END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 2ND END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| SPECIFICATION/STANDARD DATA | SAE J517,100R12 SIZE 16-81343 NATIONAL STD/SPEC |
| TEMP RATING | -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 2B 2ND END |
| THREAD CLASS | 3B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD SERIES DESIGNATOR | UN 1ST END |
| THREAD SERIES DESIGNATOR | UN 2ND END |
| THREAD QUANTITY PER INCH | 12 1ST END |
| THREAD QUANTITY PER INCH | 12 2ND END |