END CONNECTION DESIGN | ELBOW 1ST END |
END CONNECTION DESIGN | ELBOW 2ND END |
ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 160.0 |
BURST TEST PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
CROSS-SECTIONAL SHAPE STYLE | ROUND |
FLOW ANGLE | 45.0 DEGREES 1ST END |
FLOW ANGLE | 90.0 DEGREES 2ND END |
HYDROSTATIC TEST PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
INSIDE DIAMETER | 0.190 INCHES NOMINAL |
INSIDE SURFACE CONDITION | SMOOTH |
OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT |
OUTSIDE DIAMETER | 0.320 INCHES NOMINAL |
MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
MEASURING METHOD AND LENGTH | 5.625 INCHES NOMINAL WORKING |
MEDIA FOR WHICH DESIGNED | GAS SINGLE RESPONSE |
MINIMUM INSIDE BENDING RADIUS | 2.000 INCHES |
NOMINAL THREAD SIZE | 0.438 INCHES 2ND END |
NOMINAL THREAD SIZE | 0.375 INCHES 1ST END |
SEAT ANGLE | 37.0 DEGREES 1ST END |
SEAT ANGLE | 37.0 DEGREES 2ND END |
SPECIAL MARKINGS | TAPE BAND READS:ESCAPE SYSTEM NORMAL-EMPTY;EMERGENCY-HOT GASES |
SPECIFICATION/STANDARD DATA | 88277-7579263 MANUFACTURERS SPECIFICATION CONTROL |
TEST DATA DOCUMENT | 00624-AE3819 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
THREAD CLASS | 3B 1ST END |
THREAD CLASS | 3B 2ND END |
THREAD DIRECTION | RIGHT-HAND 1ST END |
THREAD DIRECTION | RIGHT-HAND 2ND END |
THREAD SERIES DESIGNATOR | UNJF 1ST END |
THREAD SERIES DESIGNATOR | UNJF 2ND END |