| HYDROSTATIC TEST PRESSURE | 4500.0 POUNDS PER SQUARE INCH |
| MAXIMUM OPERATING PRESSURE | 2250.0 POUNDS PER SQUARE INCH |
| OUTSIDE DIAMETER | 0.781 INCHES NOMINAL |
| NOMINAL THREAD SIZE | 0.375 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.375 INCHES 2ND END |
| THREAD SERIES DESIGNATOR | NPTF 1ST END |
| THREAD SERIES DESIGNATOR | NPTF 2ND END |
| OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND WEATHERPROOF |
| INSIDE SURFACE CONDITION | SMOOTH |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END CONNECTION DESIGN | STRAIGHT 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| INSIDE DIAMETER | 0.375 INCHES NOMINAL |
| BURST TEST PRESSURE | 9000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED EXTERNAL PIPE 2ND END |
| CONNECTION TYPE | THREADED EXTERNAL PIPE 1ST END |
| MEASURING METHOD AND LENGTH | 90.000 INCHES NOMINAL OVERALL |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| CONNECTION STYLE | INVERTED FLARE 1ST END |
| CONNECTION STYLE | SWIVEL, PLAIN 2ND END |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER |
| MINIMUM INSIDE BENDING RADIUS | 5.000 INCHES |
| SEAT ANGLE | 30.0 DEGREES 1ST END |