END CONNECTION DESIGN | ELBOW 1ST END |
END CONNECTION DESIGN | ELBOW 2ND END |
ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 71.0 |
BURST TEST PRESSURE | 16000.0 POUNDS PER SQUARE INCH |
CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
CROSS-SECTIONAL SHAPE STYLE | ROUND |
FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
FLOW ANGLE | 45.0 DEGREES 1ST END |
FLOW ANGLE | 90.0 DEGREES 2ND END |
HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
INSIDE DIAMETER | 0.212 INCHES NOMINAL |
INSIDE SURFACE CONDITION | SMOOTH |
LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
OUTER COVERING ENVIRONMENTAL PROTECTION | ALCOHOL RESISTANT AND CORROSION RESISTANT AND FUEL RESISTANT AND HYDRAULIC SOLUTION RESISTANT AND OIL RESISTANT |
OUTSIDE DIAMETER | 0.415 INCHES NOMINAL |
MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
MEASURING METHOD AND LENGTH | 54.750 INCHES NOMINAL WORKING |
MINIMUM INSIDE BENDING RADIUS | 3.000 INCHES |
NOMINAL THREAD SIZE | 0.438 INCHES 1ST END |
NOMINAL THREAD SIZE | 0.438 INCHES 2ND END |
SEAT ANGLE | 37.0 DEGREES 1ST END |
SEAT ANGLE | 37.0 DEGREES 2ND END |
SPECIAL FEATURES | IDENTIFICATION BAND |
VACUUM IN TORR | 50.8 |
SPECIFICATION/STANDARD DATA | 80378-CVC4356 MANUFACTURERS STANDARD |
TEMP RATING | -65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE |
THREAD CLASS | 3B 1ST END |
THREAD CLASS | 3B 2ND END |
THREAD DIRECTION | RIGHT-HAND 1ST END |
THREAD DIRECTION | RIGHT-HAND 2ND END |
THREAD SERIES DESIGNATOR | UNF 2ND END |
THREAD SERIES DESIGNATOR | UNF 1ST END |