| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END FLANGE CONSTRUCTION | SOLID 1ST END |
| BOLT CIRCLE DIAMETER | 3.500 INCHES NOMINAL 1ST END |
| BOLT HOLE DIAMETER | 0.750 INCHES NOMINAL 1ST END |
| BOLT HOLE QUANTITY | 4 1ST END |
| CONNECTION TYPE | RAISED FACE FLANGE 1ST END |
| CONNECTION STYLE | RAISED SWIVEL 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FEATURES PROVIDED | INTERNAL SUPPORT |
| FLANGE OUTSIDE DIAMETER | 4.875 INCHES NOMINAL 1ST END |
| FLANGE THICKNESS | 0.500 INCHES NOMINAL 1ST END |
| FLANGE STYLE | ROUND W/ BOLT HOLES 1ST END |
| INSIDE DIAMETER | 0.851 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| MAXIMUM OPERATING PRESSURE | 150.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 850.0 POUNDS PER SQUARE INCH |
| PROPRIETARY CHARACTERISTICS | PACS |
| MEASURING METHOD AND LENGTH | 35.000 INCHES NOMINAL WORKING |
| MINIMUM INSIDE BENDING RADIUS | 7.375 INCHES |
| OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| OUTSIDE DIAMETER | 1.140 INCHES NOMINAL |
| SPECIAL FEATURES | A 90 DEG CRES ELBOW IS LOCATED 17.500 IN. FROM FIRST END |
| RAISED FACE DIAMETER | 2.000 INCHES NOMINAL 1ST END |
| RAISED FACE HEIGHT | 0.062 INCHES NOMINAL 1ST END |
| VACUUM IN TORR | 50.8 |
| TEMP RATING | -65.0 DEG FAHRENHEIT AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE |