|
|
|
National Stock Number:
4720-01-028-1789
Federal Supply Class:
4720
National Item Identification Number:
010281789
Description:
HOSE ASSEMBLY,NONMETALLIC
Detail:
A length of nonmetallic hose with fittings on one or both ends. For items without fittings, see HOSE, NONMETALLIC. Excludes HOSE ASSEMBLY, AIR DUCT; and HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
|
Manufacturer Information:
| 97589-2 | 78570 | SMITHS TUBULAR SYSTEMS-LACONIA, INC. | | GH511DN2 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | GH511DN2 | 78570 | SMITHS TUBULAR SYSTEMS-LACONIA, INC. |
|
Techincal Specification:
| END CONNECTION DESIGN | ELBOW 2ND END | | END CONNECTION DESIGN | STRAIGHT 1ST END | | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END | | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END | | CONNECTION STYLE | SWIVEL NUT FLARE 2ND END | | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END | | CROSS-SECTIONAL SHAPE STYLE | ROUND | | FLOW ANGLE | 45.0 DEGREES 2ND END | | INSIDE DIAMETER | 1.062 INCHES NOMINAL | | INSIDE SURFACE CONDITION | CONVOLUTED | | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE | | OUTSIDE DIAMETER | 1.792 INCHES NOMINAL | | MAXIMUM OPERATING PRESSURE | 750.0 POUNDS PER SQUARE INCH | | MEASURING METHOD AND LENGTH | 14.424 INCHES NOMINAL WORKING | | NOMINAL THREAD SIZE | 1.844 INCHES 1ST END | | NOMINAL THREAD SIZE | 1.844 INCHES 2ND END | | SEAT ANGLE | 8.5 DEGREES 1ST END | | SEAT ANGLE | 8.5 DEGREES 2ND END | | SPECIAL FEATURES | SECOND END HAS AN ADDITIONAL 180 DEG BEND | | SUPPLEMENTARY FEATURES | THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL. THE CURRENT APPROVED SOURCE, 78570, HAS INDICATED THEIR PART NUMBER CONTAINED ASBESTOS. THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL | | TEMP RATING | -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE | | THREAD CLASS | 3B 1ST END | | THREAD CLASS | 3B 2ND END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | THREAD DIRECTION | RIGHT-HAND 2ND END | | THREAD SERIES DESIGNATOR | UNJS 1ST END | | THREAD SERIES DESIGNATOR | UNJS 2ND END | | THREAD QUANTITY PER INCH | 14 1ST END | | THREAD QUANTITY PER INCH | 14 2ND END |
|
|