| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END CONNECTION DESIGN | STRAIGHT 2ND END |
| BURST TEST PRESSURE | 1124.970 KILOGRAMS PER SQUARE CENTIMETER |
| CONNECTION TYPE | THREADED EXTERNAL TUBE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | INVERTED FLARE 2ND END |
| CONNECTION STYLE | SWIVEL NUT, FLARELESS 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| HYDROSTATIC TEST PRESSURE | 421.860 KILOGRAMS PER SQUARE CENTIMETER |
| INSIDE DIAMETER | 5.500 MILLIMETERS MINIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER MOLDED POLYTETRAFLUOROETHYLENE AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 3RD LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED POLYTETRAFLUOROETHYLENE |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ALCOHOL RESISTANT AND CORROSION RESISTANT AND HYDRAULIC SOLUTION RESISTANT AND OIL RESISTANT AND WATER RESISTANT |
| OUTSIDE DIAMETER | 11.906 MILLIMETERS MAXIMUM |
| MAXIMUM OPERATING PRESSURE | 210.930 KILOGRAMS PER SQUARE CENTIMETER |
| MEASURING METHOD AND LENGTH | 552.451 MILLIMETERS NOMINAL WORKING |
| MINIMUM INSIDE BENDING RADIUS | 76.200 MILLIMETERS |
| NOMINAL THREAD SIZE | 10.0 MILLIMETERS 1ST END |
| NOMINAL THREAD SIZE | 10.0 MILLIMETERS 2ND END |
| SEAT ANGLE | 30.0 DEGREES 2ND END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SPECIAL FEATURES | THREAT PITCH MILLIMETERS NOMINAL 1.6 |
| TEMP RATING | -53.9 CELSIUS AND 204.0 CELSIUS SINGLE RESPONSE |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD SERIES DESIGNATOR | ISO M 1ST END |
| THREAD SERIES DESIGNATOR | ISO M 2ND END |
| VACUUM IN TORR | 50.8 |