| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END FITTING COMPONENT AND MATERIAL | NUT ALUMINUM ALLOY 1ST END |
| END FITTING COMPONENT AND MATERIAL | NIPPLE STEEL ALL ENDS |
| END FITTING COMPONENT AND MATERIAL | SOCKET STEEL 2ND END |
| BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| EXTERIOR COLOR | NATURAL |
| FITTING COMPONENT AND SURFACE TREATMENT | NIPPLE CADMIUM 2ND END |
| FITTING COMPONENT AND SURFACE TREATMENT | NIPPLE CADMIUM ALL ENDS |
| FITTING COMPONENT AND SURFACE TREATMENT | NUT ANODIZE 1ST END |
| HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.125 INCHES MINIMUM AND 0.144 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER RUBBER IMPREGNATED BRAIDED CORROSION RESISTANT STEEL WIRE |
| OUTSIDE DIAMETER | 0.437 INCHES MINIMUM AND 0.461 INCHES MAXIMUM |
| MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 56.000 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 3.000 INCHES |
| NOMINAL THREAD SIZE | 0.375 INCHES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER |
| THREAD CLASS | 3B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD SERIES DESIGNATOR | UNJF 1ST END |