END CONNECTION DESIGN | ELBOW 2ND END |
END CONNECTION DESIGN | STRAIGHT 1ST END |
END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL CORROSION RESISTING ALL ENDS |
BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
CONNECTION STYLE | SWIVEL NUT, FLARELESS 2ND END |
CONNECTION STYLE | SWIVEL NUT, FLARELESS 1ST END |
CRITICALITY CODE JUSTIFICATION | FEAT |
CROSS-SECTIONAL SHAPE STYLE | ROUND |
FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING PASSIVATE 1ST END |
FLOW ANGLE | 45.0 DEGREES 2ND END |
HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
INSIDE DIAMETER | 0.485 INCHES NOMINAL |
INSIDE SURFACE CONDITION | SMOOTH |
LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND 2ND LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND 3RD LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
OUTSIDE DIAMETER | 1.015 INCHES NOMINAL |
MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
MEASURING METHOD AND LENGTH | 25.750 INCHES NOMINAL WORKING |
MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
MINIMUM INSIDE BENDING RADIUS | 6.500 INCHES |
NOMINAL THREAD SIZE | 0.875 INCHES 1ST END |
NOMINAL THREAD SIZE | 0.875 INCHES 2ND END |
SEAT ANGLE | 12.0 DEGREES 1ST END |
SEAT ANGLE | 12.0 DEGREES 2ND END |
SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-PLASTIC, POLYTETRAFLUOROETHYLENE; WEAPON SYSTEM ESSENTIAL |
SPECIFICATION/STANDARD DATA | 96906-MS27370J0256 GOVERNMENT STANDARD |
TEMP RATING | -65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE |
THREAD CLASS | 3B 1ST END |
THREAD CLASS | 3B 2ND END |
THREAD DIRECTION | RIGHT-HAND 1ST END |
THREAD DIRECTION | RIGHT-HAND 2ND END |
THREAD SERIES DESIGNATOR | UNJF 1ST END |
THREAD SERIES DESIGNATOR | UNJF 2ND END |