| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING COPPER ALLOY ALL ENDS |
| BURST TEST PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | INVERTED FLARE 1ST END |
| CONNECTION TYPE | THREADED EXTERNAL PIPE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| EXTERIOR COLOR | BLACK |
| FEATURES PROVIDED | REUSABLE END FITTINGS |
| HYDROSTATIC TEST PRESSURE | 500.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.375 INCHES NOMINAL |
| NOMINAL THREAD SIZE | 0.375 INCHES 1ST END |
| OUTER COVERING ENVIRONMENTAL PROTECTION | FUEL RESISTANT AND MILDEW RESISTANT AND OIL RESISTANT AND OZONE RESISTANT |
| OUTSIDE DIAMETER | 0.625 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED TEXTILE YARN 1ST LAYER BRAIDED TEXTILE YARN |
| MAXIMUM OPERATING PRESSURE | 250.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 15.875 INCHES NOMINAL OVERALL |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 3.000 INCHES |
| SEAT ANGLE | 30.0 DEGREES 1ST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD SERIES DESIGNATOR | NPT 1ST END |
| VACUUM IN TORR | 50.8 |
| SPECIFICATION/STANDARD DATA | MIL-H-13444,TYPE 1 PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| END CONNECTION DESIGN | STRAIGHT 1ST END |