5975-01-003-6137 FUSE BOX AND CONDUIT Index 4730-01-003-6140 TEE,TUBE TO BOSS

National Stock Number:
4720-01-003-6139

Federal Supply Class:
4720

National Item Identification Number:
010036139

Description:
HOSE ASSEMBLY,NONMETALLIC

Detail:
A length of nonmetallic hose with fittings on one or both ends. For items without fittings, see HOSE, NONMETALLIC. Excludes HOSE ASSEMBLY, AIR DUCT; and HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.


Manufacturer Information:
323067398441PARKER HANNIFIN CORP
69D51828-798750SAN ANTONIO AIR LOGISTICS CENTER


Techincal Specification:
END CONNECTION DESIGNELBOW 1ST END
END CONNECTION DESIGNELBOW 2ND END
END FITTING COMPONENT AND MATERIALCOMPLETE FITTING STEEL ALL ENDS
END FLANGE CONSTRUCTIONSOLID 1ST END
END FLANGE CONSTRUCTIONSOLID 2ND END
ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG180.0
BURST TEST PRESSURE20000.0 POUNDS PER SQUARE INCH
CONNECTION TYPERECESSED FLANGE 2ND END
CONNECTION TYPERECESSED FLANGE 1ST END
CONNECTION STYLERECESSED W/GASKET GROOVE 2ND END
CONNECTION STYLERECESSED W/GASKET GROOVE 1ST END
CROSS-SECTIONAL SHAPE STYLEROUND
FITTING COMPONENT AND SURFACE TREATMENTCOMPLETE FITTING CADMIUM 1ST END
FLANGE OUTSIDE DIAMETER1.750 INCHES NOMINAL 1ST END
FLANGE OUTSIDE DIAMETER1.750 INCHES NOMINAL 2ND END
FLANGE STYLEROUND W/ OUT BOLT HOLES 1ST END
FLANGE STYLEROUND W/ OUT BOLT HOLES 2ND END
FLANGE THICKNESS0.325 INCHES NOMINAL 1ST END
FLANGE THICKNESS0.325 INCHES NOMINAL 2ND END
FLOW ANGLE45.0 DEGREES 1ST END
FLOW ANGLE90.0 DEGREES 2ND END
INSIDE DIAMETER0.750 INCHES NOMINAL
INSIDE SURFACE CONDITIONSMOOTH
LAYER COMPOSITION AND LOCATION1ST LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND 2ND LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND 3RD LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND 4TH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND OUTER LAYER RUBBER IMPREGNATED FABRIC
OUTSIDE DIAMETER1.440 INCHES NOMINAL
MAXIMUM OPERATING PRESSURE5000.0 POUNDS PER SQUARE INCH
MEASURING METHOD AND LENGTH14.200 INCHES NOMINAL WORKING
MEDIA FOR WHICH DESIGNEDFUEL/OIL, HYDROCARBON SINGLE RESPONSE
MINIMUM INSIDE BENDING RADIUS10.000 INCHES
RECESS DEPTH0.195 INCHES NOMINAL 1ST END
RECESS DEPTH0.195 INCHES NOMINAL 2ND END
RECESS DIAMETER0.815 INCHES NOMINAL 1ST END
RECESS DIAMETER0.815 INCHES NOMINAL 2ND END
SPECIAL FEATURESINNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC
TEMP RATING-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE


Click here to Register for Free 30-day Trial