| END CONNECTION DESIGN | ELBOW 1ST END |
| END CONNECTION DESIGN | ELBOW 2ND END |
| END FLANGE CONSTRUCTION | SOLID 1ST END |
| END FLANGE CONSTRUCTION | SOLID 2ND END |
| BURST TEST PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | RECESSED FLANGE 2ND END |
| CONNECTION TYPE | RECESSED FLANGE 1ST END |
| CONNECTION STYLE | RECESSED 1ST END |
| CONNECTION STYLE | RECESSED 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| FLANGE OUTSIDE DIAMETER | 2.000 INCHES NOMINAL 1ST END |
| FLANGE OUTSIDE DIAMETER | 2.000 INCHES NOMINAL 2ND END |
| FLANGE STYLE | ROUND W/ OUT BOLT HOLES 1ST END |
| FLANGE STYLE | ROUND W/ OUT BOLT HOLES 2ND END |
| FLANGE THICKNESS | 0.315 INCHES NOMINAL 1ST END |
| FLANGE THICKNESS | 0.315 INCHES NOMINAL 2ND END |
| FLOW ANGLE | 30.0 DEGREES 1ST END |
| FLOW ANGLE | 90.0 DEGREES 2ND END |
| INSIDE DIAMETER | 1.000 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND OIL RESISTANT |
| MEASURING METHOD AND LENGTH | 22.625 INCHES MINIMUM WORKING AND 23.375 INCHES MAXIMUM WORKING |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| RECESS DIAMETER | 1.455 INCHES NOMINAL 1ST END |
| RECESS DIAMETER | 1.455 INCHES NOMINAL 2ND END |