| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| BURST TEST PRESSURE | 10000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| HYDROSTATIC TEST PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.875 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 3RD LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND FUEL RESISTANT AND HYDRAULIC SOLUTION RESISTANT AND OIL RESISTANT AND WEATHERPROOF |
| OUTSIDE DIAMETER | 1.500 INCHES NOMINAL |
| MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 300.000 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | AIR AND HYDRAULIC FLUID SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 9.625 INCHES |
| NOMINAL THREAD SIZE | 1.312 INCHES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| SPECIFICATION/STANDARD DATA | 96906-MS28759-16-3000 GOVERNMENT STANDARD |
| TEMP RATING | -65.0 FAHRENHEIT AND 158.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |