END CONNECTION DESIGN | STRAIGHT 1ST END |
END FITTING COMPONENT AND MATERIAL | NIPPLE STEEL ALL ENDS |
END FITTING COMPONENT AND MATERIAL | NIPPLE ALUMINUM ALLOY 2ND END |
END FITTING COMPONENT AND MATERIAL | NUT STEEL 1ST END |
BURST TEST PRESSURE | 10000.0 POUNDS PER SQUARE INCH |
CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
CROSS-SECTIONAL SHAPE STYLE | ROUND |
FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
HYDROSTATIC TEST PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
INSIDE DIAMETER | 0.875 INCHES NOMINAL |
INSIDE SURFACE CONDITION | SMOOTH |
LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 3RD LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND OIL RESISTANT |
OUTSIDE DIAMETER | 1.500 INCHES NOMINAL |
MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
MEASURING METHOD AND LENGTH | 180.000 INCHES NOMINAL WORKING |
MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
MINIMUM INSIDE BENDING RADIUS | 9.600 INCHES |
NOMINAL THREAD SIZE | 1.312 INCHES 1ST END |
SEAT ANGLE | 37.0 DEGREES 1ST END |
SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
SPECIFICATION/STANDARD DATA | 96906-MS28759 GOVERNMENT STANDARD |
TEMP RATING | -65.0 FAHRENHEIT AND 156.0 FAHRENHEIT SINGLE RESPONSE |
THREAD CLASS | 3B 1ST END |
THREAD DIRECTION | RIGHT-HAND 1ST END |
THREAD SERIES DESIGNATOR | UNF 1ST END |
THREAD QUANTITY PER INCH | 12 1ST END |