| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END CONNECTION DESIGN | STRAIGHT 2ND END |
| BURST TEST PRESSURE | 9000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED EXTERNAL PIPE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | PLAIN 2ND END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| HYDROSTATIC TEST PRESSURE | 4500.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.375 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED COTTON CORD AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND COLD RESISTANT AND LIGHT RESISTANT AND OIL RESISTANT |
| OUTSIDE DIAMETER | 0.781 INCHES NOMINAL |
| MAXIMUM OPERATING PRESSURE | 2250.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 10.750 INCHES NOMINAL OVERALL |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 5.000 INCHES |
| NOMINAL THREAD SIZE | 0.375 INCHES 2ND END |
| NOMINAL THREAD SIZE | 0.562 INCHES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| TEMP RATING | -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD SERIES DESIGNATOR | NPT 2ND END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |