| MINIMUM INSIDE BENDING RADIUS | 24.000 INCHES |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM 1ST END |
| EXTERIOR COLOR | BLACK |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| HYDROSTATIC TEST PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| LAYER COMPOSITION AND LOCATION | 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| LAYER COMPOSITION AND LOCATION | 3RD LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER |
| SEAT ANGLE | 12.0 DEGREES 1ST END |
| CONNECTION STYLE | SWIVEL NUT WITH LOOSE OR INTEGRAL CLINCH SLEEVE 1ST END |
| THREAD CLASS | 3B 1ST END |
| TEMP RATING | -65.0 DEG FAHRENHEIT AND 156.0 DEG FAHRENHEIT SINGLE RESPONSE |
| THREAD QUANTITY PER INCH | 12 1ST END |
| INSIDE DIAMETER | 0.875 INCHES NOMINAL |
| SPECIFICATION/STANDARD DATA | 96906-MS28762 GOVERNMENT STANDARD |
| FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| NOMINAL THREAD SIZE | 1.938 INCHES 1ST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| INSIDE SURFACE CONDITION | SMOOTH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND HYDRAULIC SOLUTION RESISTANT AND OIL RESISTANT |
| MEASURING METHOD AND LENGTH | 27.000 INCHES NOMINAL WORKING |
| BURST TEST PRESSURE | 10000.0 POUNDS PER SQUARE INCH |
| THREAD SERIES DESIGNATOR | UN 1ST END |
| OUTSIDE DIAMETER | 1.500 INCHES NOMINAL |
| MEDIA FOR WHICH DESIGNED | AIR AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE |