| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END FITTING COMPONENT AND MATERIAL | NIPPLE STEEL COMP 302 ALL ENDS |
| END FITTING COMPONENT AND MATERIAL | SOCKET STEEL COMP 302 1ST END |
| BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | PLAIN 1ST END |
| CONNECTION TYPE | THREADED EXTERNAL PIPE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| EXTERIOR COLOR | BLACK |
| FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| FITTING COMPONENT AND SURFACE TREATMENT | NIPPLE PASSIVATE ALL ENDS |
| FITTING COMPONENT AND SURFACE TREATMENT | SOCKET PASSIVATE 1ST END |
| HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.250 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED COTTON CORD AND 2ND LAYER MOLDED RUBBER AND 3RD LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED RUBBER |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND MILDEW RESISTANT AND OIL RESISTANT |
| OUTSIDE DIAMETER | 0.688 INCHES NOMINAL |
| MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID, SILICATE-ESTER BASE SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 4.000 INCHES |
| NOMINAL THREAD SIZE | 0.250 INCHES 1ST END |
| SEAT ANGLE | 90.0 DEGREES 1ST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; THE HOSE BRAID,END FITTINGS AND SPRINGS SHALL BE FABRICATED FROM AUSTENITIC STEEL OF LOW MAGNETIC PERMEABILITY |
| TEMP RATING | 0.0 FAHRENHEIT AND 150.0 FAHRENHEIT SINGLE RESPONSE |
| TEST DATA DOCUMENT | 81349-MILH24239 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD QUANTITY PER INCH | 18 1ST END |
| THREAD SERIES DESIGNATOR | NPT 1ST END |