| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END CONNECTION DESIGN | STRAIGHT 2ND END |
| BURST TEST PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | PLAIN 2ND END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CONNECTION TYPE | THREADED EXTERNAL PIPE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| HYDROSTATIC TEST PRESSURE | 750.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.875 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 2ND LAYER BRAIDED WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED FABRIC AND 1ST LAYER BRAIDED FABRIC |
| OUTER COVERING ENVIRONMENTAL PROTECTION | FUEL RESISTANT AND MILDEW RESISTANT AND OIL RESISTANT AND OZONE RESISTANT |
| OUTSIDE DIAMETER | 1.175 INCHES MINIMUM AND 1.237 INCHES MAXIMUM |
| MAXIMUM OPERATING PRESSURE | 375.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 30.500 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 3.500 INCHES |
| NOMINAL THREAD SIZE | 0.750 INCHES 2ND END |
| NOMINAL THREAD SIZE | 1.312 INCHES 1ST END |
| NONDEFINITIVE SPEC/STD DATA | 3 TYPE |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| VACUUM IN TORR | 508.0 |
| SPECIFICATION/STANDARD DATA | 81349-MIL-H-13444 GOVERNMENT SPECIFICATION |
| TEMP RATING | -67.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 2B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD SERIES DESIGNATOR | NPTF 2ND END |
| THREAD SERIES DESIGNATOR | UN 1ST END |
| THREAD QUANTITY PER INCH | 12 1ST END |