|
|
|
National Stock Number:
4330-01-532-6652
Federal Supply Class:
4330
National Item Identification Number:
015326652
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| FP310-1 | 13800 | PARKER-HANNIFIN CORPORATION |
|
Techincal Specification:
| FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | SPECIAL FEATURES | MICRON RATING IS 1. FILTER MEDIA: PHENOLIC IMPREGNATED CELLULOSE. CORE MATERIAL: ETP STEEL. END CAP MATERIAL: ETP STEEL. SLEEVE MATERIAL: POLYPROPYLENE. ADHESIVE MATERIAL: THERMOSETTING PVC. END SEAL MATERIAL: BUNA-N GASKETS. DIFFERENTIAL PRESSURE: 70 PSI (4.8 BAR). FLOW RATE PER SINGLE CARTRIDGE: 7 GPM. DIMENSIONS FOR 300 SERIES: 2-1/2 IN OD X 1 IN ID X 9-5/8 IN. 12 LBS SHIPPING WEIGHT. | | TEMP RATING | 250.0 FAHRENHEIT NOMINAL |
|
|