|
|
|
National Stock Number:
4330-01-524-4804
Federal Supply Class:
4330
National Item Identification Number:
015244804
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| L115773 | 35972 | L-3 COMMUNICATIONS ELECTRONICSYSTEMS INC DBA L-3 ELECTRONIC SYST DBA L-3 ELECTRONIC SYSTEM SERVICES | | P165354 | 18265 | DONALDSON COMPANY, INC. |
|
Techincal Specification:
| BODY DIAMETER | 3.820 INCHES NOMINAL | | BODY OVERALL LENGTH | 5.970 INCHES NOMINAL | | DESIGN TYPE | NONREUSABLE | | FILTRATION RATING IN MICRONS | 5.0 ABSOLUTE | | MATERIAL | STEEL BODY | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | PART NAME ASSIGNED BY CONTROLLING AGENCY | HYDRAULIC SPIN ON | | SPECIAL FEATURES | WORKING PRESSURE: 500 PSI; BURST PRESSURE: 1000 PSI; FLOW: 35 GPM; PORTING SIZE: SAE-12 O-RING; THREAD SIZE: 1 3/8-12IN; GASKET OD: 2.76IN; GASKET ID: 2.48IN; FILTER MEDIA: SYNTEQ SYNTHETIC MEDIA; FILTER HEAD SNOUT/POST MUST BE LUBRICATED BEFORE SPINNING ON A NEW FILTER TO PREVENT THREAD DAMAGE; ELEMENT COLLAPSE RATING: 150 PSID | | STYLE DESIGNATOR | CYLINDRICAL W/ INTEGRAL OUTER CASING | | TEMP RATING | 20.0 DEG FAHRENHEIT MINIMUM AND 250.0 DEG FAHRENHEIT MAXIMUM |
|
|