|
|
|
National Stock Number:
4330-01-264-0714
Federal Supply Class:
4330
National Item Identification Number:
012640714
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 10041 | 15472 | SOLVENTUM PURIFICATION INC. | | 10041-01-50-0050 | 15472 | SOLVENTUM PURIFICATION INC. | | KAT-A | 15472 | SOLVENTUM PURIFICATION INC. |
|
Techincal Specification:
| DESIGN TYPE | REUSABLE | | BODY DIAMETER | 1.250 INCHES NOMINAL | | BODY OVERALL LENGTH | 5.797 INCHES NOMINAL | | FEATURES PROVIDED | CLEANING BLADES AND DIFFERENTIAL PRESSURE RELIEF VALVE | | FILTERING MEDIA DESIGN | MULTIPLE STACKED DISKS SINGLE FILTERING MEDIA RESPONSE | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | STEEL FILTERING MEDIUM | | MATERIAL | ZINC BODY | | III STYLE DESIGNATOR | MULTIPLE STACKED DISKS, W/CLEANING BLADES | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | MOUNTING FLANGE THICKNESS | 0.325 INCHES NOMINAL | | SPECIAL FEATURES | INCLUDES MTG FLANGE W/ OUTLET CONN,MANUAL CLEANING DEVICE W/ HANDLE | | SUPPLEMENTARY FEATURES | THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL. THE CURRENT APPROVED SOURCE, 15472, HAS INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984. THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984 | | TEMP RATING | 200.0 DEG FAHRENHEIT MAXIMUM |
|
|