|
|
|
National Stock Number:
4330-01-208-7182
Federal Supply Class:
4330
National Item Identification Number:
012087182
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 7511130 | 05228 | PTI TECHNOLOGIES INC. | | 7511130 | 64829 | ARVINMERITOR INC |
|
Techincal Specification:
| BODY DIAMETER | 1.625 INCHES NOMINAL | | BODY INSIDE DIAMETER | 0.875 INCHES NOMINAL | | BODY OVERALL LENGTH | 3.437 INCHES NOMINAL | | DESIGN TYPE | NONREUSABLE | | FILTERING MEDIA DESIGN | MESH 2ND FILTERING MEDIA RESPONSE | | FILTERING MEDIA DESIGN | PLEATED 1ST FILTERING MEDIA RESPONSE | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FILTRATION RATING IN MICRONS | 15.0 ABSOLUTE AND 5.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-F-8815A MIL SPEC 1ST MATERIAL RESPONSE AND MIL-F-55-04B MIL SPEC 2ND MATERIAL RESPONSE FILTERING MEDIUM | | MATERIAL | FIBER OR STEEL CORROSION RESISTING FILTERING MEDIUM | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | TEMP RATING | -65.0 FAHRENHEIT MINIMUM AND 275.0 CELSIUS MAXIMUM |
|
|