|
|
|
National Stock Number:
4330-01-161-5339
Federal Supply Class:
4330
National Item Identification Number:
011615339
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 11668618 | 13800 | PARKER-HANNIFIN CORPORATION | | 11668618 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 4330011615339 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 4330011615339 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 94535 | 60244 | CELANESE PLASTICS AND SPECIALTIES CO DIV OF CELANESE CORP HYTREX DIV | | 9636-5003R12R8/SP2 | 13800 | PARKER-HANNIFIN CORPORATION | | CF8EID | 90005 | PUROLATOR FACET INC. |
|
Techincal Specification:
| DESIGN TYPE | NONREUSABLE | | DIFFERENTIAL PRESSURE | 70.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 2.380 INCHES MINIMUM AND 2.530 INCHES MAXIMUM | | BODY INSIDE DIAMETER | 1.060 INCHES MINIMUM AND 1.120 INCHES MAXIMUM | | BODY OVERALL LENGTH | 7.820 INCHES MINIMUM AND 7.940 INCHES MAXIMUM | | FILTERING MEDIA DESIGN | HONEYCOMB SINGLE FILTERING MEDIA RESPONSE OR SPUN SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 40.0 NOMINAL | | FLOW DIRECTION | INSIDE OUT | | MATERIAL | RAYON FILTERING MEDIUM OR PLASTIC POLYPROPYLENE FILTERING MEDIUM | | III STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | SPECIAL FEATURES | POLYPROPYLENE CENTERING INSERT |
|
|