|
|
|
National Stock Number:
4330-01-064-1620
Federal Supply Class:
4330
National Item Identification Number:
010641620
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 15R30GXC | 13800 | PARKER-HANNIFIN CORPORATION | | C20AW30AEC1A | 05430 | MEMTEC AMERICA CORP FILTERITE SALES DIV | | C20AW30AEC1A | 98913 | BREW RICHARD D AND CO |
|
Techincal Specification:
| DESIGN TYPE | NONREUSABLE | | DIFFERENTIAL PRESSURE | 125.0 POUNDS PER SQUARE INCH | | DROP PRESSURE | 15.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 2.500 INCHES NOMINAL | | BODY INSIDE DIAMETER | 1.000 INCHES NOMINAL | | BODY OVERALL LENGTH | 30.000 INCHES NOMINAL | | FILTERING MEDIA DESIGN | SPIRAL WOUND SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 20.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | COTTON FILTERING MEDIUM | | III STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON AND GAS AND WATER | | SPECIAL FEATURES | 304 STAINLESS STEEL CORE | | TEMP RATING | 300.0 DEG FAHRENHEIT NOMINAL |
|
|