|
|
|
National Stock Number:
4330-01-062-3770
Federal Supply Class:
4330
National Item Identification Number:
010623770
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 415G-40TL | 59165 | NORMAN FILTER COMPANY, L.L.C. | | 415G-40V | 59165 | NORMAN FILTER COMPANY, L.L.C. | | 415G-40VL | 59165 | NORMAN FILTER COMPANY, L.L.C. | | 4330PL1254277 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 4331-518 | 05CK7 | WINTEC LLC | | U-10134 | 59165 | NORMAN FILTER COMPANY, L.L.C. | | W125084 | 88663 | DRESSER-RAND CO INGERSOLL-RAND OPNS A JOINT VENTURE | | 929222 | 05779 | PARKER-HANNIFIN CORPORATION | | 14578 | 05779 | PARKER-HANNIFIN CORPORATION | | F-1006-50E | 4FX47 | CHASE FILTERS & COMPONENTS, LLC | | 715-75WEN | 3BFK7 | 3B FILTERS INC |
|
Techincal Specification:
| DESIGN TYPE | REUSABLE | | DIFFERENTIAL PRESSURE | 4500.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 1.140 INCHES NOMINAL | | BODY OVERALL LENGTH | 5.330 INCHES NOMINAL | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FILTERING SURFACE AREA | 5.0 SQUARE FEET | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FILTRATION RATING IN MICRONS | 40.0 NOMINAL | | FLOW DIRECTION | INSIDE OUT | | MATERIAL | RUBBER BUNA N SEAL | | MATERIAL | STEEL COMP 304 FILTERING MEDIUM | | III STYLE DESIGNATOR | SUMP TYPE | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | WATER | | NOMINAL THREAD SIZE | 0.875 INCHES | | SPECIAL FEATURES | METAL END CAP; ABSOLUTE 75.0 MICRONS | | TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND 275.0 DEG FAHRENHEIT MAXIMUM | | THREAD SERIES DESIGNATOR | NPT |
|
|