|
|
|
National Stock Number:
4330-01-033-1649
Federal Supply Class:
4330
National Item Identification Number:
010331649
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 1376-18-685 | A0199 | FINMECCANICA SPA | | 926837 | 05779 | PARKER-HANNIFIN CORPORATION | | AC9600FUT8H | 06816 | PALL CORP | | AC9600FUT8H | 60047 | PALL AEROPOWER CORP SUB OF PALL CORP MECTRON INDUSTRIES DIV | | HC9600FCT8H | H5441 | HITMA ULTRAPURE B.V. | | HC9600FKT8H | 1EP30 | PALL AEROPOWER CORPORATION | | HC9600FKT8H | H5441 | HITMA ULTRAPURE B.V. | | HC9600FUT8H | 06816 | PALL CORP | | HF3-030-JF-B | 05228 | PTI TECHNOLOGIES INC. | | PLD309761 | 16603 | CONTROL FLOW, INC. | | R960-Z-0825A | 61363 | PARKER HANNIFIN CORPORATION DIV HYDRAULIC FILTER DIVISION FAIREY ARLON OPERATIONS |
|
Techincal Specification:
| DROP PRESSURE | 2.6 POUNDS PER SQUARE INCH | | BODY DIAMETER | 3.125 INCHES NOMINAL | | BODY INSIDE DIAMETER | 1.670 INCHES NOMINAL | | BODY OVERALL LENGTH | 8.000 INCHES NOMINAL | | DESIGN TYPE | NONREUSABLE | | DIFFERENTIAL PRESSURE | 150.0 POUNDS PER SQUARE INCH | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FILTRATION RATING IN MICRONS | 25.0 ABSOLUTE AND 10.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | FIBER SYNTHETIC AND RESIN SYNTHETIC FILTERING MEDIUMRUBBER BUNA N SEAL | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | SPECIAL FEATURES | CRES END CAPS AND CORE | | STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | TEMP RATING | -45.0 FAHRENHEIT MINIMUM AND 225.0 FAHRENHEIT MAXIMUM |
|
|