|
|
|
National Stock Number:
4330-01-026-3186
Federal Supply Class:
4330
National Item Identification Number:
010263186
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 23495 | 10989 | PALL AEROPOWER CORP SUB OF PALL CORP MECTRON INDUSTRIES DIV | | 2652687 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| DROP PRESSURE | 65.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 0.230 INCHES NOMINAL | | BODY INSIDE DIAMETER | 0.170 INCHES NOMINAL | | BODY OVERALL LENGTH | 1.250 INCHES NOMINAL | | DESIGN TYPE | NONREUSABLE | | DIFFERENTIAL PRESSURE | 750.0 POUNDS PER SQUARE INCH | | FILTERING MEDIA DESIGN | MESH SINGLE FILTERING MEDIA RESPONSE | | FLOW DIRECTION | PARALLEL | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE FILTERING MEDIUM | | MATERIAL | STEEL CORROSION RESISTING SEAL | | MEDIA FOR WHICH DESIGNED | WATER | | SPECIAL FEATURES | 37 DEG FLARE ONE END; 0.375 IN. MIN OD TO 0.476 IN. MAX OD; FILTRATION RATING 145.0 TO 205.0 MICRON | | STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | TEMP RATING | -65.0 FAHRENHEIT MINIMUM AND 550.0 FAHRENHEIT MAXIMUM |
|
|