|
|
|
National Stock Number:
4330-01-015-0730
Federal Supply Class:
4330
National Item Identification Number:
010150730
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 10234315 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 10234315 | 28337 | NEWMET KREBSOGE INC | | 10234315 (JOB NR418) | 28337 | NEWMET KREBSOGE INC | | FC142-40 | 00481 | ASCO SINTERING CO |
|
Techincal Specification:
| DROP PRESSURE | 3.0 POUNDS PER SQUARE INCH | | BODY OVERALL LENGTH | 0.195 INCHES NOMINAL | | DESIGN TYPE | NONREUSABLE | | FILTERING MEDIA DESIGN | SINTERED SINGLE FILTERING MEDIA RESPONSE | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FILTRATION RATING IN MICRONS | 50.0 ABSOLUTE AND 25.0 NOMINAL | | FLOW DIRECTION | INSIDE OUT | | LARGEST OUTSIDE DIAMETER | 0.298 INCHES NOMINAL | | MATERIAL | COPPER ALLOY FILTERING MEDIUM | | MEDIA FOR WHICH DESIGNED | GAS | | SMALLEST OUTSIDE DIAMETER | 0.224 INCHES NOMINAL | | SPECIAL FEATURES | ELEMENT ID IS ONLY 0.110 IN. DEEP AND NOT A THRU HOLE | | TAPERED HOLE MAJOR DIAMETER | 0.156 INCHES NOMINAL | | TAPERED HOLE MINOR DIAMETER | 0.125 INCHES NOMINAL |
|
|