|
|
|
National Stock Number:
4330-01-009-5709
Federal Supply Class:
4330
National Item Identification Number:
010095709
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 20779S | 14629 | CAPITAL WESTWARD INC | | 5952 | 14629 | CAPITAL WESTWARD INC | | 5952S | 14629 | CAPITAL WESTWARD INC |
|
Techincal Specification:
| BODY DIAMETER | 1.500 INCHES NOMINAL | | BODY OVERALL LENGTH | 7.000 INCHES NOMINAL | | DESIGN TYPE | REUSABLE | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 15.0 NOMINAL AND 5.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | NICKEL ALLOY BODY | | MATERIAL | STEEL CORROSION RESISTING FILTERING MEDIUM | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | NOMINAL THREAD SIZE | 1.500 INCHES | | SPECIAL FEATURES | OUTLET END FITTING PER MS16142-6,CONE AND RUBBER RING ON OPPOSITE END,O/A LG EXCLUDING THICKNESS OF THE HEX WRENCHING FEATURE OF OUTLET FITTING IS 6.81 IN. MAX | | TEMP RATING | 125.0 FAHRENHEIT NOMINAL | | THREAD SERIES DESIGNATOR | UNF |
|
|