|
|
|
National Stock Number:
4330-00-806-0025
Federal Supply Class:
4330
National Item Identification Number:
008060025
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| C12417 | 91340 | MET-PRO CORPORATION | | D13207E1365SIZE2 | 81336 | CHIEF OF ENGINEERS DEPT OF ARMY | | M52333-2 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-52333 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILS52333 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BODY DIAMETER | 3.641 INCHES NOMINAL | | BODY INSIDE DIAMETER | 3.328 INCHES NOMINAL | | BODY OVERALL LENGTH | 22.781 INCHES NOMINAL | | DESIGN TYPE | REUSABLE | | DIFFERENTIAL PRESSURE | 35.0 POUNDS PER SQUARE INCH | | FILTERING MEDIA DESIGN | PERFORATED SINGLE FILTERING MEDIA RESPONSE | | FLOW DIRECTION | INSIDE OUT | | MATERIAL | PLASTIC POLYVINYL CHLORIDE AND FIBERBOARD FILTERING MEDIUM | | MEDIA FOR WHICH DESIGNED | WATER | | NONDEFINITIVE SPEC/STD DATA | 2 SIZE | | SPECIFICATION/STANDARD DATA | 81349-MIL-S-52333 GOVERNMENT SPECIFICATION | | SPECIAL FEATURES | RECT PERFORATIONS IN SLEEVE | | STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER |
|
|