|
|
|
National Stock Number:
4330-00-759-9774
Federal Supply Class:
4330
National Item Identification Number:
007599774
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| AC-6836-G | 18350 | PALL AEROPOWER CORPORATION | | AC6836E8 | 18350 | PALL AEROPOWER CORPORATION |
|
Techincal Specification:
| DESIGN TYPE | REUSABLE | | DIFFERENTIAL PRESSURE | 4500.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 1.195 INCHES NOMINAL | | BODY INSIDE DIAMETER | 0.781 INCHES NOMINAL | | BODY OVERALL LENGTH | 2.837 INCHES NOMINAL | | FILTERING MEDIA DESIGN | CORRUGATED SINGLE FILTERING MEDIA RESPONSE OR SINTERED SINGLE FILTERING MEDIA RESPONSE OR WOVEN SINGLE FILTERING MEDIA RESPONSE | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FILTRATION RATING IN MICRONS | 5.0 NOMINAL | | FLOW DIRECTION | INSIDE OUT OR OUTSIDE IN | | MATERIAL | STEEL CORROSION RESISTING FILTERING MEDIUM | | III STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | AIR | | TEMP RATING | 0.0 DEG FAHRENHEIT MINIMUM AND 160.0 DEG FAHRENHEIT MAXIMUM |
|
|