|
|
|
National Stock Number:
4330-00-690-4211
Federal Supply Class:
4330
National Item Identification Number:
006904211
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 050523-02 | 87405 | FACET (OKLAHOMA) LLC | | 050523-02 | 90005 | PUROLATOR FACET INC. | | 638061 | 87405 | FACET (OKLAHOMA) LLC | | 640906 | 87405 | FACET (OKLAHOMA) LLC | | J6826-1PC11 | 87405 | FACET (OKLAHOMA) LLC | | MILF27706 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | ST611FD | 87405 | FACET (OKLAHOMA) LLC |
|
Techincal Specification:
| DESIGN TYPE | NONREUSABLE | | DIFFERENTIAL PRESSURE | 75.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 6.000 INCHES NOMINAL | | BODY INSIDE DIAMETER | 3.500 INCHES MINIMUM AND 3.510 INCHES MAXIMUM | | BODY OVERALL LENGTH | 11.250 INCHES NOMINAL | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 5.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | RUBBER BUNA N SEAL | | III STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | ANY ACCEPTABLE | | TEMP RATING | 200.0 DEG FAHRENHEIT NOMINAL |
|
|