| DISPLACEMENT TYPE | CONSTANT |
| DRIVE SHAFT TYPE | SPLINED, INVOLUTE INTERNAL |
| BOLT HOLE QUANTITY | 4 |
| BOLT HOLE SPACING | 3.062IN. BY 1.688IN. AND 2.062IN. BY 1.030IN |
| BOLT HOLE THREAD SIZE | 0.500-13 AND 0.375-16 |
| CONNECTION DESIGN | FLANGED |
| CONNECTION QUANTITY | 2 |
| CONSTANT DISPLACEMENT PER REVOLUTION | 15.000 CUBIC INCHES |
| CONNECTION TYPE | INLET AND OUTLET |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 2500.0 |
| MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 2500PSI AT UNKNOWN TEMP |
| MOUNTING BOLT HOLE SPACING | 7.124IN. APART |
| MOUNTING HOLE DIAMETER | 0.688 INCHES NOMINAL |
| MOUNTING HOLE QUANTITY | 2 |
| MOUNTING TYPE | FLANGE |
| SHAFT PROTRUSION LENGTH | 2.188 INCHES NOMINAL |
| SHAFT ROTATION DIRECTION | CLOCKWISE AND COUNTERCLOCKWISE |
| PITCH DIAMETER | 0.167 INCHES NOMINAL |
| SPECIAL FEATURES | PIGGY-BACK BI-DIRECTIONAL GEAR MOTOR COMPRISED OF AN M25 AND M20 SERIES MOTOR,JOINED BY 4-BOLT TRANSITION PLATE B125; SAE 2-BOLT C MTG FLANGE; 8.38IN.O/A W,17.60IN.O/A L; M25 PORTS 2.00IN.DIA,M20 PORTS 1.00IN.DIA |
| TORQUE LOAD RATING | 4460.0 INCH-POUNDS |
| SPLINE LENGTH | 1.650 INCHES NOMINAL |
| SPLINE MAJOR DIAMETER | 1.229 INCHES NOMINAL |
| SPLINE MINOR DIAMETER | 1.062 INCHES NOMINAL |
| SPLINE PITCH | 12/24 |
| SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| SPLINE QUANTITY | 14 |
| SUPPLEMENTARY FEATURES | 2 INLET AND 2 OUTLET PORTS |