| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END CONNECTION DESIGN | STRAIGHT 2ND END |
| BURST TEST PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | PLAIN 2ND END |
| CONNECTION TYPE | THREADED EXTERNAL HOSE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL HOSE 1ST END |
| CONNECTION STYLE | SWIVEL NUT, GASKET SEAL 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FEATURES PROVIDED | PERFORATED OUTER COVER |
| HYDROSTATIC TEST PRESSURE | 500.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.750 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 2ND LAYER BRAIDED POLYESTER CORD OR 2ND LAYER ARAMID FIBERS OR OUTER LAYER MOLDED RUBBER, ETHYLENE PROPYLENE OR 1ST LAYER ARAMID FIBERS |
| OUTER COVERING ENVIRONMENTAL PROTECTION | HEAT RESISTANT |
| MAXIMUM OPERATING PRESSURE | 250.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 600.000 INCHES NOMINAL WORKING |
| MINIMUM INSIDE BENDING RADIUS | 7.500 INCHES |
| NOMINAL THREAD SIZE | 0.750 INCHES 2ND END |
| NOMINAL THREAD SIZE | 0.750 INCHES 1ST END |
| NONDEFINITIVE SPEC/STD DATA | B TYPE AND 3/4 IN. SIZE |
| SPECIAL FEATURES | NONCOLLAPSIBLE |
| SPECIFICATION/STANDARD DATA | 81349-MIL-H-24580/SH/ GOVERNMENT SPECIFICATION |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD QUANTITY PER INCH | 11-1/2 1ST END |
| THREAD QUANTITY PER INCH | 11-1/2 2ND END |
| THREAD SERIES DESIGNATOR | NH 1ST END |
| THREAD SERIES DESIGNATOR | NH 2ND END |