| ELECTRIC MOTOR HORSEPOWER RATING | 1.500 |
| ELECTRIC MOTOR QUANTITY | 1 |
| ACCESSORY COMPONENTS AND QUANTITY | 2 NO.3 MORSE TAPER LATHE CENTERS,3 CHUCKS,1 FLEXIBLE RUBBER COLLET SET,5 BENT TAIL DOG LATHES,1 DOG LATHE,1 DRIVE PLATE,1 FACEPLATE,1 METRIC TRANSPOSING GEAR LATHE,1 BORING BAR CUTTING TOOL HOLDER,3 CUTTING-OFF CUTTING TOOL HOLDERS,3 TURNING CUTTING TOOL HOLDERS,1 V-FORM THREADING TOOL HOLDER,1 KNURLING TOOLS,4 COLLET PLUGS,2 LATHE RESTS,1 LATHE CENTER SLEEVE,1 MICROMETER LATHE CARRIAGE STOP,1 TELESCOPIC LATHE TAPEP ATTACHMENT |
| ACTUAL SWING OVER BED | 13.000 INCHES NOMINAL |
| CARRIAGE FEED CHANGE QUANTITY | 48 |
| CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| CARRIAGE QUANTITY | 1 |
| CENTER TO CENTER DISTANCE | 30.000 INCHES MINIMUM |
| CURRENT TYPE | AC |
| DESIGN TYPE | SCREW |
| FREQUENCY IN HERTZ | 60.0 |
| HEADSTOCK DRIVE TYPE | STEP CONE PULLEY, BACK GEARED |
| HOLE DIAMETER THROUGH SPINDLE | 1.375 INCHES NOMINAL |
| MOUNTING TYPE | FLOOR |
| SPECIAL FEATURES | 1400 LBS.MAX NET WT OF LATHE; FLOOR CABINET DESIGNED FOR STOWAGE OF ALL ACCESSORIES |
| PERFORMANCE TYPE | STANDARD DUTY |
| PHASE | SINGLE |
| PURPOSE FOR WHICH DESIGNED | GENERAL |
| RATED SWING | 13.000 INCHES NOMINAL |
| SPINDLE SPEED QUANTITY | 12 |
| SPINDLE SPEED RANGE IN RPM | +53.0 TO 1800.0 |
| SWING OVER CROSS SLIDE | 7.750 INCHES NOMINAL |
| THREAD CHANGE QUANTITY | 48 |
| THREAD QUANTITY RANGE | +4.0 TO 80.0 PER INCH |
| VOLTAGE IN VOLTS | 115.0 AND 230.0 |