|
|
|
National Stock Number:
3405-01-271-1415
Federal Supply Class:
3405
National Item Identification Number:
012711415
Description:
SAW,BAND,CUTOFF
Detail:
A VARIABLE SPEED SAW DESIGNED FOR CUTTING OFF METAL BARS AND SHAPES BY MEANS OF A BLADE, BAND SAW WHICH IS REVOLVED OR ROTATED AROUND A DRIVER AND IDLER WHEEL. THE TEETH FORM A HORIZONTAL (OR TILTED) LINE WHILE PASSING THROUGH THE WORK. THE WORK TABLE IS SIMILAR TO THAT OF A SAW, POWER HACK. SEE ALSO SAW (3), BAND METAL CUTTING.
|
Manufacturer Information:
| 3405-2253-3613 | 99998 | DEFENSE SUPPLY CENTER RICHMOND INDUSTRIAL PLANT EQUIPMENT /DLA/ | | 361-H | 7W681 | STARTRITE INC | | V900H | 64501 | CLAUSING INDUSTRIAL INC |
|
Techincal Specification:
| CUT TYPE FOR WHICH DESIGNED | DRY | | CUTTING BLADE LENGTH | 180.000 INCHES MINIMUM AND 183.000 INCHES MAXIMUM | | CUTTING BLADE WIDTH | 0.750 INCHES NOMINAL | | CUTTING SPEED RANGE | +50.0 TO 5200.0 FEET PER MINUTE | | CURRENT TYPE | AC | | FREQUENCY RATING | 60.0 HERTZ NOMINAL | | HORSEPOWER RATING | 3.000 | | SPECIAL FEATURES | 2 SPEED GEARED TRANSMISSION; MAGNETIC STARTER WITH 110 VOLT CONTROL AND OVERLOAD PROTECTION; SLIDING TABLE 26.0 IN. BY 27.750 IN.; TWO-WAY TABLE TILT 45.0 DEGREES RIGHT,15.0 DEGREES LEFT; 1 FRONT EDGE T-SLOT,4 TABLE TOP T-SLOTS; BUILT-IN HYDRAULIC POWER FEED WITH FAST TRAVERSE AND CUTTING CONTROL; 36 IN. THROAT; 14 IN. WORK HEIGHT UNDER TOP GUIDE; 3 BANDWHEELS 16.0 IN. DIA.,1.750 IN. THICK; BONDED RUBBER WHEEL TIRES; CARBIDE BLADE GUIDES WITH BACKUP ROLLER; 0 TO 35.0 IN. PER MINUTE FEED RATE; 2 GALLON HYDRAULIC TANK CAPACITY; 42 IN. TABLE HEIGHT; BUILT-IN BLADE WELDER,SHEAR,AND FLASH GRINDER FOR 1.0 IN. CAPACITY BLADE; BUILT-IN GROUNDED 110 VOLT RECEPTACLE; BUILT-IN AIR CHIP BLOWER; TABLE TRUNNION AND GUIDE WRENCH; OPERATION AND PARTS MANUAL; OVERALL LENGTH 80.0 IN.; OVERALL WIDTH 43.0 IN.; OVERALL HEIGHT 82.0 IN.; NET WEIGHT 1680 POUNDS; SHIPPING WEIGHT 2030 POUNDS | | PHASE | THREE | | VOLTAGE RATING | 220.0 VOLTS MINIMUM AND 440.0 VOLTS MAXIMUM |
|
|