| ASSEMBLY OVERALL LENGTH | 0.937 INCHES NOMINAL |
| BOLT CIRCLE DIAMETER | 5.281 INCHES NOMINAL |
| BORE DIAMETER | 1.2400 INCHES MINIMUM AND 1.2600 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM |
| HOUSING DIAMETER | 5.714 INCHES MINIMUM AND 5.724 INCHES MAXIMUM |
| HOUSING LENGTH | 0.781 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A564 ASSN STD SINGLE MATERIAL RESPONSE HOUSING |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE INNER LINER |
| MATERIAL | ALUMINUM ALLOY 6061 HOUSING |
| MATERIAL | STEEL COMP 630 INNER LINER |
| MOUNTING HOLE DIAMETER | 0.211 INCHES MINIMUM AND 0.223 INCHES MAXIMUM |
| MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| SPECIAL FEATURES | 3 HOLES CSK 90 DEGREES APART TO 0.215 IN. DIA,0.190-32 UNF-2B EQUALLY SPACED; 3 HOLES THRU ONE WALL 0.500 IN. DIA; 1 PIN GROOVED HEADLESS PER MS35678-23 |
| PILOT DIAMETER | 4.4985 INCHES MINIMUM AND 4.4995 INCHES MAXIMUM |
| PILOT LENGTH | 0.464 INCHES MINIMUM AND 0.474 INCHES MAXIMUM |
| SHAFT END TYPE | OPEN |
| STYLE DESIGNATOR | FLANGE CARTRIDGE BLOCK |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE HOUSING |
| SURFACE TREATMENT | ANODIZE INNER LINER |