| ALIGNMENT TYPE | SELF-ALIGNING |
| ASSEMBLY OVERALL LENGTH | 1.1562 INCHES NOMINAL |
| BASE THICKNESS | 0.2812 INCHES NOMINAL |
| BASE LENGTH | 1.0000 INCHES NOMINAL |
| BLOCK TYPE | FIXED |
| BORE DIAMETER | 0.5000 INCHES MINIMUM AND 0.5010 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 3.2188 INCHES MINIMUM AND 3.6562 INCHES MAXIMUM |
| FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 1.0625 INCHES NOMINAL |
| HOUSING WIDTH | 4.4375 INCHES NOMINAL |
| HOUSING HEIGHT | 2.0312 INCHES NOMINAL |
| INTERNAL FIT-UP DESIGNATION | STANDARD |
| LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 45.0 DEGREES NOMINAL |
| LUBRICATION FITTING TYPE | HYDRAULIC |
| LUBRICATION MATERIAL | GREASE |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE BEARING |
| MATERIAL | IRON MALLEABLE HOUSING |
| MATERIAL | RUBBER SYNTHETIC SEAL |
| MATERIAL | STEEL COMP E52100 BEARING |
| MOUNTING HOLE TYPE | SLOTTED |
| MOUNTING SLOT LENGTH | 0.9688 INCHES NOMINAL |
| MOUNTING SLOT WIDTH | 0.3750 INCHES NOMINAL |
| ROLLING ELEMENT GROOVE QUANTITY | 1 |
| ROTATING ELEMENT LOCKING METHOD | DIRECT |
| SEAL LOCATION | BOTH ENDS |
| SEAL TYPE | CONTACT |
| SHAFT END TYPE | OPEN |
| STYLE DESIGNATOR | PILLOW BLOCK, SOLID |
| TEMP RATING | -25.0 FAHRENHEIT AND 250.0 FAHRENHEIT |