|
|
|
National Stock Number:
3120-01-545-6643
Federal Supply Class:
3120
National Item Identification Number:
015456643
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 211059451 | 96169 | ELECTRIC BOAT CORPORATION | | 545-7006698 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 545-7006698 ITEM 6 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| DIAMETER | 5.7800 INCHES MINIMUM AND 5.7900 INCHES MAXIMUM | | CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | MATERIAL | PLASTIC ACETAL OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 11.8650 INCHES MINIMUM AND 11.8850 INCHES MAXIMUM | | OVERALL THICKNESS | 0.5000 INCHES NOMINAL | | SPECIAL FEATURES | MILITARY DWG IS EXPORT CONTROLLED-NOT TO BE RELEASED OUTSIDE USA. | | STYLE DESIGNATOR | ROUND |
|
|