|
|
|
National Stock Number:
3120-01-525-5642
Federal Supply Class:
3120
National Item Identification Number:
015255642
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 19657-1 | 07070 | NAVY, UNITED STATES DEPARTMENT OF THE DBA NAVAL SURFACE WARFARE CENTER PANAMA CITY |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CORNER SHAPE | CHAMFERED FIRST OUTSIDE CORNER | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | DIAMETER | 1.5600 INCHES NOMINAL | | OUTSIDE DIAMETER | 4.4000 INCHES NOMINAL | | OVERALL THICKNESS | 0.1250 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 304 OVERALL | | SPECIAL FEATURES | 4 MOUNTING HOLES EQUIDISTANT 1.960 DIAMETER, EACH THRU HOLE 0.256 INCH DIAMETER | | PART NAME ASSIGNED BY CONTROLLING AGENCY | THRUST BEARING SUPPORT STREAMING ROLLER | | STYLE DESIGNATOR | ROUND |
|
|