|
|
National Stock Number: 3120-01-523-5009
Federal Supply Class: 3120
National Item Identification Number: 015235009
Description: BEARING,WASHER,THRUST
Detail: An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
3TS-030-60A PART 08 | 57661 | CONBRACO INDUSTRIES INC | CX01291 | 57661 | CONBRACO INDUSTRIES INC | CX01456 | 57661 | CONBRACO INDUSTRIES INC |
|
Techincal Specification:
DIAMETER | 0.5250 INCHES NOMINAL | CENTER HOLE SHAPE STYLE | ROUND | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | PART NAME ASSIGNED BY CONTROLLING AGENCY | BEARING, PINION THRUST, CT030 ACTUATOR | PROPRIETARY CHARACTERISTICS | PACS | OUTSIDE DIAMETER | 0.8050 INCHES MINIMUM AND 0.8150 INCHES MAXIMUM | OVERALL THICKNESS | 0.0620 INCHES NOMINAL | SPECIAL FEATURES | MATERIAL AMODEL AS-1133 HS PPA RESIN OR ENGINEERING APPROVED EQUIVALENT | STYLE DESIGNATOR | ROUND |
|
|