|
|
|
National Stock Number:
3120-01-353-9019
Federal Supply Class:
3120
National Item Identification Number:
013539019
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 732212-1 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| DIAMETER | 0.3050 INCHES MINIMUM AND 0.3110 INCHES MAXIMUM | | CENTER HOLE SHAPE STYLE | ROUND | | CORNER SHAPE | CHAMFERED INSIDE RIGHT CORNER | | CORNER SHAPE | SQUARE INSIDE LEFT CORNER | | CORNER SHAPE | SQUARE OUTSIDE LEFT CORNER | | CORNER SHAPE | SQUARE OUTSIDE RIGHT CORNER | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5513 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 304 OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 0.7900 INCHES NOMINAL | | OVERALL THICKNESS | 0.0550 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM | | STYLE DESIGNATOR | ROUND | | SURFACE FINISH | 32.0 MICROINCHES LEFT SIDE | | SURFACE FINISH | 32.0 MICROINCHES RIGHT SIDE |
|
|