|
|
|
National Stock Number:
3120-01-351-6436
Federal Supply Class:
3120
National Item Identification Number:
013516436
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 748719 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CORNER SHAPE | SQUARE ALL CORNERS | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | DIAMETER | 1.0010 INCHES MINIMUM AND 1.0030 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.6920 INCHES MINIMUM AND 1.7220 INCHES MAXIMUM | | OVERALL THICKNESS | 0.0775 INCHES MINIMUM AND 0.0795 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4640 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY 630 OVERALL | | STYLE DESIGNATOR | ROUND | | SURFACE FINISH | 16.0 MICROINCHES LEFT SIDE16.0 MICROINCHES RIGHT SIDE |
|
|