|
|
|
National Stock Number:
3120-01-270-0761
Federal Supply Class:
3120
National Item Identification Number:
012700761
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 183141-3 | 71791 | CURTISS-WRIGHT CONTROLS, INC. |
|
Techincal Specification:
| MATERIAL | STEEL COMP M50 OVERALL | | HARDNESS RATING | 60.0 ROCKWELL C MINIMUM AND | | 63.0 ROCKWELL C MAXIMUM OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | STYLE DESIGNATOR | ROUND | | OUTSIDE DIAMETER | 0.9648 INCHES MINIMUM AND | | 0.9652 INCHES MAXIMUM | | CORNER SHAPE | SQUARE ALL CORNERS | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | OVERALL THICKNESS | 0.2340 INCHES MINIMUM AND | | 0.2350 INCHES MAXIMUM | | CENTER HOLE SHAPE STYLE | ROUND | | DIAMETER | 0.6800 INCHES MINIMUM AND | | 0.6900 INCHES MAXIMUM | | SPECIAL FEATURES | USED ON F-16; NHA 183050 | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 71791 | | DESIGN CONTROL REFERENCE | 183141-3 |
|
|