| BORE CENTER TO SHANK END DISTANCE | 2.9000 INCHES NOMINAL |
| BORE DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM RACE INSERT |
| HARDNESS RATING | 37.0 ROCKWELL C NOMINAL INNER MEMBER |
| INNER MEMBER WIDTH | 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| LUBRICATION MATERIAL | GREASE, MIL-G-81322 |
| LUBRICATION FEATURE | GROOVE RACE INSERT |
| OUTER MEMBER WIDTH | 0.3850 INCHES MINIMUM AND 0.3900 INCHES MAXIMUM |
| OUTER MEMBER OUTSIDE DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| OVERALL LENGTH | 3.6000 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643,17-4PH ASSN STD SINGLE MATERIAL RESPONSE RACE INSERT |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-530,COND HT FED SPEC SINGLE MATERIAL RESPONSE INNER MEMBER |
| MATERIAL DOCUMENT AND CLASSIFICATION | ST0160LB0012 ALLOY H+9-4-30 MFR REF SINGLE MATERIAL RESPONSE ROD END BODY |
| MATERIAL | COPPER ALLOY 172 INNER MEMBER |
| MATERIAL | STEEL COMP 630 RACE INSERT |
| MATERIAL | STEEL ROD END BODY |
| SHANK STYLE | INTERNALLY THREADED |
| SHANK THREAD LENGTH | 0.9000 INCHES NOMINAL |
| SPECIAL FEATURES | REQUIRES LD131-0019-0008 BEARING |
| STYLE DESIGNATOR | BALL TYPE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | LA0109-025 NICKEL TIN MFR REF SINGLE TREATMENT RESPONSE ROD END BODY |
| SURFACE TREATMENT | NICKEL ALLOY ROD END BODY |
| THREAD CLASS | 3A |
| THREAD DIAMETER | 0.562 INCHES NOMINAL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES DESIGNATOR | UNJF |
| THREAD QUANTITY PER INCH | 18 |