| BORE CENTER TO SHANK END DISTANCE | 6.1225 INCHES NOMINAL |
| BORE DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM RACE INSERT |
| HARDNESS RATING | 37.0 ROCKWELL C NOMINAL INNER MEMBER |
| INNER MEMBER WIDTH | 0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| LUBRICATION MATERIAL | GREASE, MIL-G-81322 |
| LUBRICATION FEATURE | GROOVE RACE INSERT |
| OUTER MEMBER WIDTH | 0.7920 INCHES MINIMUM AND 0.7970 INCHES MAXIMUM |
| OUTER MEMBER OUTSIDE DIAMETER | 1.8745 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM |
| OVERALL LENGTH | 7.0600 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643,17-4PH ASSN STD SINGLE MATERIAL RESPONSE RACE INSERT |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-530,COND HT FED SPEC SINGLE MATERIAL RESPONSE INNER MEMBER |
| MATERIAL DOCUMENT AND CLASSIFICATION | ST0160LB0012 ALLOY H+9-4-30 MFR REF SINGLE MATERIAL RESPONSE ROD END BODY |
| MATERIAL | COPPER ALLOY 172 INNER MEMBER |
| MATERIAL | STEEL COMP 630 RACE INSERT |
| MATERIAL | STEEL ROD END BODY |
| SHANK STYLE | INTERNALLY THREADED |
| SHANK THREAD LENGTH | 2.9400 INCHES NOMINAL |
| SPECIAL FEATURES | DRILL THRU HOLE WITH .250-28UNJF-3B THREADS- ONE SIDE RACE-AT 45 DEGREEANGLE FROM CENTER; REQUIRES LD131-0019-0016 BEARING |
| STYLE DESIGNATOR | BALL TYPE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | LA0109-025 NICKEL TIN MFR REF SINGLE TREATMENT RESPONSE ROD END BODY |
| SURFACE TREATMENT | NICKEL ALLOY ROD END BODY |
| THREAD CLASS | 3A |
| THREAD DIAMETER | 1.500 INCHES NOMINAL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES DESIGNATOR | UNJEF |
| THREAD QUANTITY PER INCH | 18 |